Summer Starts Here - Save up to 70%
T-One Vehicle Wiring Harness Installation - 2012 Chevrolet Camaro- Video
Speaker 1: Today on our 2012 Chevrolet Camaro, we're gonna take a look at and show you how to install the Ticoncha T-1 Vehicle Wiring Harness with the full flat trailer connector, part number is 118556. This T-connector vehicle wiring harness is gonna be the solution to get a forward pull flat trailer connector on the back of your Camaro. Now we received the signals for the trailer from a module box. This box is designed with stand alone power and stand alone ground so it's gonna generate the power we need to power our trailer from the box. That, in essence, is gonna mean we're not drawing any power through the lighting system of the Camaro so we're not going to be overloading any of those circuits. Now we use our T-connectors, this is where the T-connector name comes in to plug in right between our tail light and our factory wiring, that sends a signal through the wire and it tells the box when to turn on the lights on the trailer and which ones to turn on.An added benefit you'll have to the module is that you don't have to worry about any kind of back feed. more
5/14/2018 2:37:19 PM
Trailer Wiring Harness Installation - 1995 Chevrolet Camaro- Video
Today on our 1995 Chevrolet Camaro well be installing trailer harness part number 18252. And for opening the rear deck lid, well remove the driver side inside trim panel. With the trim panel removed, we can peel the carpeting away at the back of the trunk which will expose our wiring. Now on this particular vehicle, they make it really nice. Youll notice here that the factory wiring harness is the same colors as trailer 4-pole wiring. Well also need to locate a ground for our 4-pole harness which, in the Camaro, we can use one of the existing ground points here directly underneath the latch. more
4/12/2012 1:14:43 PM
Filter Videos
Filter Videos
